Three durable hose bibs
Solid brass bodies with easy-turn wheel handles. Standard 3/4" GHT connections fit any hose, splitter, or timer.
Three-bib vinyl garden post
Three taps. One post. Water where you actually need it.
Connect one garden hose from the house to the inlet on the back of the post, and you have three solid brass bibs out at the garden bed, the fence line, or the far corner of the yard. No trenching, no plumber.
$299
$349
Launch price
Free shipping on 2 or more. Launch pricing ends October 31.
3Independent brass hose bibs
3/4"Standard hose thread on every bib
4 × 4 inVinyl post, fits standard sleeves
0Trenches to dig. Feeds from a hose.
Why MultiBib
One supply line in. Three hoses out.
Run one hose from the house spigot to the 3/4" inlet on the back of the post and stop dragging hoses across the lawn. Each bib shuts off on its own, so a drip timer, a sprinkler, and a hand-watering hose can all live on the same post.
Premium vinyl construction
Weather-resistant, UV-stable vinyl that stays white season after season. No rot, no rust, no repainting.
Accessorize your setup
Add a hose hanger bracket, a battery timer, or drip fittings. Accessories are available as add-ons when you order.
In the garden
Put the timer on the post, not on the house.
Screw a battery timer onto one bib and the raised bed waters itself every morning. The other two bibs stay free for the hand hose and the sprinkler, and the whole thing runs off a single hose from the house.
- One bib runs the bedA battery timer screws straight onto the top bib. Set the schedule once and the drip line does the rest.
- Two bibs stay openThe hand hose and the sprinkler get their own bibs, so nobody unscrews the timer to fill a watering can.
- Fed from the houseA regular garden hose connects to the inlet on the back of the post. Nothing to trench unless you want to.
Installation
Set it up in an afternoon. No trenching required.
MultiBib ships pre-plumbed. All three bibs connect inside the post to a 3/4" hose inlet on the back, so a regular garden hose from any house spigot is the whole supply. If you would rather bury the line, the same inlet takes a PEX adapter.
Set the post
Slide the MultiBib sleeve over a pressure-treated 4 × 4, set it in a 10" concrete footing, or drive the included ground stake for a no-dig install. Level it and press the cap on.
Connect a hose to the back
Run a garden hose from the house spigot to the rear inlet. Tuck it along the fence line or under mulch. For a permanent buried line, use the PEX adapter in the buried supply kit.
Open the spigot once
Leave the house spigot on and control everything at the post. Check each bib, add mulch or stone around the base, and you're done.
Specifications
The details.
| Post | 4 × 4 in nominal vinyl sleeve (3.5 × 3.5 in actual), 48 in above grade |
|---|---|
| Cap | New England pyramid cap, press fit, white |
| Hose bibs | 3 × solid brass, 3/4 in GHT outlet, wheel handle |
| Bib spacing | Outlets at 12, 24, and 36 in above grade |
| Inlet | 3/4 in GHT hose inlet on the rear face, 8 in above grade. Optional PEX adapter for a buried line |
| Pressure rating | Up to 125 psi at 70°F |
| Shipping weight | 14 lb, one carton 54 × 8 × 8 in |
| Warranty | 10 years on post and cap, 2 years on bibs |
Freezing climates: drain the post each fall by disconnecting the supply hose from the rear inlet and opening all three bibs, the same as any outdoor spigot. An optional frost-free inlet valve is available for buried lines.
Order
Build your order.
Choose your quantity and add-ons, enter your shipping details, and we will email you a secure payment link within one business day. Nothing is charged on this page.
of first-run posts leftLaunch price locked while they last
Order received.
Your order reference is . We will email a payment link to within one business day. Nothing ships until you approve it.
This page is not yet connected to an order system, so the request above was not sent anywhere. Copy the summary and email it to orders@multibib.example, or connect the form by setting the order endpoint in the page script.
Questions
Before you order.
Do I need a plumber or a trench?
No. The inlet on the back of the post takes a standard garden hose from any outdoor spigot, so the whole install is set the post and screw on a hose. If you want the supply out of sight for good, the buried supply kit adds a PEX adapter for a trenched line. That is optional.
What about winter?
Treat it like any outdoor spigot. Disconnect the supply hose from the rear inlet, open all three bibs, and let the post drain. On a buried line, the frost-free inlet add-on does the draining for you whenever the supply is closed.
Does it fit over an existing 4 × 4 fence post?
Yes. The sleeve is sized for a standard pressure-treated 4 × 4 (3.5" actual). You can also set it directly in concrete using the included base bracket.
Can I run all three bibs at once?
Yes. Each bib has its own valve. Total flow depends on your supply pressure. On a typical 50 psi house line, two hoses and a drip timer run comfortably together.
What is the return policy?
Return an uninstalled post within 30 days for a full refund of the product price. Installed posts are covered by the 10-year warranty on the post and cap and the 2-year warranty on the bibs.